DA installation failed

[pppplus]

Hi, after some try, I give up (i go sleeping some hours).

Error messages :

/usr/local/directadmin/custombuild/httpd-2.2.16/srclib/apr/libtool: line 393: /bin/sed: Cannot allocate memory
/usr/local/directadmin/custombuild/httpd-2.2.16/srclib/apr/libtool: fork: Cannot allocate memory
/usr/local/directadmin/custombuild/httpd-2.2.16/srclib/apr/libtool: fork: Cannot allocate memory
/bin/sh: /bin/sh: Cannot allocate memory
/usr/local/directadmin/custombuild/httpd-2.2.16/srclib/apr/libtool: fork: Cannot allocate memory
/usr/local/directadmin/custombuild/httpd-2.2.16/srclib/apr/libtool: fork: Cannot allocate memory
/usr/local/directadmin/custombuild/httpd-2.2.16/srclib/apr/libtool: fork: Cannot allocate memory
/usr/local/directadmin/custombuild/httpd-2.2.16/srclib/apr/libtool: fork: Cannot allocate memory
make[3]: *** [strings/apr_cpystrn.lo] Error 126
make[3]: *** Waiting for unfinished jobs....
make[3]: *** [strings/apr_fnmatch.lo] Error 129
/usr/local/directadmin/custombuild/httpd-2.2.16/srclib/apr/libtool: line 1103: echo: write error: Cannot allocate memory
/usr/local/directadmin/custombuild/httpd-2.2.16/srclib/apr/libtool: line 1103: /bin/sed: Cannot allocate memory
/usr/local/directadmin/custombuild/httpd-2.2.16/srclib/apr/libtool: fork: Cannot allocate memory
/usr/local/directadmin/custombuild/httpd-2.2.16/srclib/apr/libtool: fork: Cannot allocate memory
/usr/local/directadmin/custombuild/httpd-2.2.16/srclib/apr/libtool: fork: Cannot allocate memory
/usr/local/directadmin/custombuild/httpd-2.2.16/srclib/apr/libtool: pipe error: Too many open files in system
/usr/local/directadmin/custombuild/httpd-2.2.16/srclib/apr/libtool: fork: Cannot allocate memory
make[3]: *** [passwd/apr_getpass.lo] Error 128
gcc: : No such file or directory
make[3]: *** [strings/apr_snprintf.lo] Error 1
make[3]: Leaving directory `/usr/local/directadmin/custombuild/httpd-2.2.16/srclib/apr'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/usr/local/directadmin/custombuild/httpd-2.2.16/srclib/apr'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/usr/local/directadmin/custombuild/httpd-2.2.16/srclib'
make: *** [all-recursive] Error 1


Installation
OpenVz Container with centos 5 64 bits

If you have a solution, it's perfect. I find nothing on forum and on google.
Best regards

[carlo_gra]

Hi, after some try, I give up (i go sleeping some hours).

Error messages :

/usr/local/directadmin/custombuild/httpd-2.2.16/srclib/apr/libtool: line 393: /bin/sed: Cannot allocate memory
/usr/local/directadmin/custombuild/httpd-2.2.16/srclib/apr/libtool: fork: Cannot allocate memory
/usr/local/directadmin/custombuild/httpd-2.2.16/srclib/apr/libtool: fork: Cannot allocate memory
/bin/sh: /bin/sh: Cannot allocate memory
/usr/local/directadmin/custombuild/httpd-2.2.16/srclib/apr/libtool: fork: Cannot allocate memory
/usr/local/directadmin/custombuild/httpd-2.2.16/srclib/apr/libtool: fork: Cannot allocate memory
/usr/local/directadmin/custombuild/httpd-2.2.16/srclib/apr/libtool: fork: Cannot allocate memory
/usr/local/directadmin/custombuild/httpd-2.2.16/srclib/apr/libtool: fork: Cannot allocate memory
make[3]: *** [strings/apr_cpystrn.lo] Error 126
make[3]: *** Waiting for unfinished jobs....
make[3]: *** [strings/apr_fnmatch.lo] Error 129
/usr/local/directadmin/custombuild/httpd-2.2.16/srclib/apr/libtool: line 1103: echo: write error: Cannot allocate memory
/usr/local/directadmin/custombuild/httpd-2.2.16/srclib/apr/libtool: line 1103: /bin/sed: Cannot allocate memory
/usr/local/directadmin/custombuild/httpd-2.2.16/srclib/apr/libtool: fork: Cannot allocate memory
/usr/local/directadmin/custombuild/httpd-2.2.16/srclib/apr/libtool: fork: Cannot allocate memory
/usr/local/directadmin/custombuild/httpd-2.2.16/srclib/apr/libtool: fork: Cannot allocate memory
/usr/local/directadmin/custombuild/httpd-2.2.16/srclib/apr/libtool: pipe error: Too many open files in system
/usr/local/directadmin/custombuild/httpd-2.2.16/srclib/apr/libtool: fork: Cannot allocate memory
make[3]: *** [passwd/apr_getpass.lo] Error 128
gcc: : No such file or directory
make[3]: *** [strings/apr_snprintf.lo] Error 1
make[3]: Leaving directory `/usr/local/directadmin/custombuild/httpd-2.2.16/srclib/apr'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/usr/local/directadmin/custombuild/httpd-2.2.16/srclib/apr'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/usr/local/directadmin/custombuild/httpd-2.2.16/srclib'
make: *** [all-recursive] Error 1


Installation
OpenVz Container with centos 5 64 bits

If you have a solution, it's perfect. I find nothing on forum and on google.
Best regards


I think there's two problems:

1) In a row I can see "cannot allocate memory": it's possibile that you haven't not enough memory and swap
2) In a other row I can see "gcc: non such file or directory": it's possible that this error is related to the first one but ensure that you have all prerequisites. (but if you arrived at this point I think that you have gcc)

[pppplus]

Thanks for reply.

But no, there is enough memory, and Package gcc-4.1.2-48.el5.x86_64 already installed and latest version.

Regards

[pppplus]

Ok, I've found a solution!

I deleted my container, and rebuild it, with same caracteristics.

Then (read on a website):

yum update -y
yum install gcc-c++ gcc automake -y
yum install flex

What is automake and flex, I don't know...

Then :
yum remove httpd* php* mysql* -y
http was installed, so this line remove it.

Then, normal installation :

wget http://directadmin.com/setup.sh
chmod +x setup.sh
./setup.sh

[czotos]

Hi pppplus

Before I run the installation/setup for DirectAdmin, I install these packages on my CentOS-based servers:


yum install gcc gcc-c++ flex automake make ntp lynx nmap mc bison autoconf openssl openssl-devel libstdc++ less system-config-network-tui mlocate system-config-securitylevel-tui wget db4-devel perl-libwww-perl system-config-date zip unzip quota dbus which gpg cyrus-sasl-devel bzip2 e2fsprogs-devel jwhois vim-minimal telnet libc-client libc-client-devel ImageMagick

I hope that helps!

[pppplus]

thanks zotos, I just post my solution before yours.

I note for next time ! :)

[carlo_gra]

Ok, I've found a solution!

I deleted my container, and rebuild it, with same caracteristics.

Then (read on a website):

yum update -y
yum install gcc-c++ gcc automake -y
yum install flex


:rolleyes:

[czotos]

Haha, pppplus!

We posted our messages at the exact same time: 08-14-2010, 10:55 AM

Great minds think alike! :)