PDA

View Full Version : Setting shared IP Direct Admin



tza
05-25-2010, 03:22 AM
hello
Server setup 2 IP addresses I want to associate Reseller customer has

Reseller belongs
Then I made one site IP
IP locked only this site to become owned.
I want some sites will be under the same IP Reseller
How to do it

How to make IP address shared outside the primary IP address

tanks you

ranz
05-25-2010, 04:49 AM
It's quite simple, and realistically you will probably need more than 2 x IPs, especially if you reseller has already used one up for dedicated (or even SSL). You will most likely want to add a "pool" of IPs to your DA and don't forget to enable them on your network setup (ifconfig).

Go into DA Admin and allocated the IPs to your Resellers as you see fit:

http://admin.site-helper.com/ipman.html

tza
05-25-2010, 05:12 AM
hi
i dont understand how i do this

the 2 ip in ifconfig :

eth0:3 Link encap:Ethernet HWaddr xx:xx:xx:xx:xx:xx
inet addr:212.xx.xx.xx Bcast:212.xx.xx.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Interrupt:177

eth0:4 Link encap:Ethernet HWaddr xx:xx:xx:xx:xx:xx
inet addr:212.xx.yy.xx Bcast:212.xx.yy.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Interrupt:177


now the reseler X is owned 2ip
and when i open user account and get ip , the ip is onnly one site

i dont sucseed sharde ip

ranz
05-25-2010, 06:17 AM
what are eth0:1 and eth0:2 used for?

what's stopping you from allocating more IP's to eth0:5, eth0:6 etc?

tza
05-25-2010, 10:27 AM
i dont need more IP and is more money

eto is the primary ip
et 1 is free ip - tow ip


eth0 Link encap:Ethernet HWaddr xx:xx:xx:xx:xx:xx

inet addr:212.xx.xx.xx Bcast:212.xx.xx.xx Mask:255.255.255.0
inet6 addr: xx:xx:xx:xx:xx:xx
:9258/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:223490358 errors:0 dropped:0 overruns:0 frame:0
TX packets:249711198 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:4208630177 (3.9 GiB) TX bytes:2283188196 (2.1 GiB)
Interrupt:177

eth0:1 Link encap:Ethernet HWaddr xx:xx:xx:xx:xx:xx

inet addr:212.xx.xx.xx Bcast:212.xx.xx.xx Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Interrupt:177

ranz
05-25-2010, 09:00 PM
ok so it looks as if you have 4 IP's in total.

So why can't you allocate one of those to a shared IP pool - and don't allow it to be taken as dedicated.

i dont need more IP and is more money
If your clients need a dedicated IP, they pay you for it, so you shouldn't need to worry about "money" in that sense.

tza
05-26-2010, 12:44 AM
but how i do it as sharde
is owned and i whant sharde

ranz
05-26-2010, 04:27 AM
but how i do it as sharde
is owned and i whant sharde




Go into DA Admin and allocated the IPs to your Resellers as you see fit:

http://admin.site-helper.com/ipman.html

Do you read this post and visit this link?

tza
05-26-2010, 04:55 AM
yes

and dont understand how i do this

nobaloney
05-26-2010, 11:20 AM
First remove all users from the IP#. Then click to share it.

Then move the users back.

Jeff

tza
05-27-2010, 08:11 AM
i have no the optain to share it